| NOTE
: |
 |
| . |
Locate
drivers & passengers side covers before fitting. Drivers
side cover and Passenger side cover are different. |
| . |
The open
panel of the cover must be on the door side of the car where
the side airbag is or would be for none airbag seats. |
| . |
Remove both headrests from seats before fitting. |
| 1. |
Slide cover over top of seat
working cover down evenly. Push rod through in between seat
backrest & base. |
 |
| |
| 2. |
Push rod all the way to the
back. |
 |
| |
| 3. |
Using the plastic trim tool
push tie through to the back of seat. |
 |
| |
| 4. |
Pull firmly on the rod from
the back of the seat. |
 |
| |
| 5. |
Pull ties from the sides and
close together at back of seat. |
 |
| |
| 6. |
Locate headrest holes of seat
and using a thin screw driver dab a hole on seat cover. |
 |
| |
| 7. |
Push headrest rods through the
dabbed holes and replace headrest back on to seat. |
 |
